Sustainable Architecture Essay Example | Topics and Well Written Essays - 1000 words

Sustainable Architecture - Essay Example Engineered structural materials is defined as "recycled/reconstituted wood materials that employ laminated wood chips or strands and finger jointing (the gluing of larger pieces together)" (Sustainable Building Sourcebook, 2006). The materials that formulate the structured materials fall under the category of engineered wood and as such it means that the "tolerances in stability, consistency, straightness and strength are more precise then dimensional lumber, making the products easier to work with. In joist and rafter applications, the reconstituted products are particularly useful for long spans without bowing or lateral movement" (Sustainable Building Sourcebook, 2006). When making these building materials look to drastically minimise the amount of waste that is created in processing the raw materials as waste wood and entire trees, regardless of their size, age or species can be utilised in making these products. "Finger jointed studs reduce waste in two ways. Short pieces that normally would be unusable are combined rather than disposed and the engineered quality of finger jointed materials eliminate warping or cracking. The strength of the joints in good quality material is such that the solid wood portions will be more likely to break than the adhered finger joint" (Sustainable Building Sourcebook, 2006). The following graph outline both satisfactory and unsatisfactory or difficult in various circumstances of recycled/reconstituted wood and explain the ease of both finding satisfactory results in finding the technology and costs relatively low. There is also the issue of both finding the financing in engaging in implementing the recycled/ reconstituted wood along with much more public acceptance as the public continues to be interested in companies that engage in sustainable material practices. Figure 1 Commercial Status Implementation Issues Recycled/Reconstituted Wood Legend Satisfactory Satisfactory in most conditions Satisfactory in Limited Conditions Unsatisfactory or Difficult When looking toward sustainable materials in the construction industry it is important to start with forestry management. There are many companies that look toward accomplishing sustainable building product development by first looking toward how to better utilise the forest itself. Hunt and Winandy (2002) write about how 3D engineered fibreboard as "an economically viable process to produce three-dimensional structural fibreboard products that can utilise a wide range of lignocellulosic fibres contained in the forest undergrowth and in underutilised timber. This will encourage the public and private sector to undertake thinning or clearing of these components from the forest thereby reducing or removing dangerous fuels and minimising costs to the federal government for fire mitigation" (106). Hunt and Winandy's (2002) proposed product "consists of a structural material which can be made from a wide range of little or no-value

Interest groups and Political parties Essay Example | Topics and Well Written Essays - 500 words

Interest groups and Political parties - Essay Example Common good can be referred to as the goodness of an event or a phenomenon that is shared by all communities of a given society. Thus, keeping in view the roles played by interest groups and political parties, it can be stated that both the groups are conducive in working towards common good of a particular society and those elements which make up that society. However, this statement holds certain pre conditions, i.e. the interest groups are not self centered and political parties do not strive for gaining power only over all others. In other words, it is the intent behind the formation of these groups which comes into play and is considered extremely important. Motives, actions and desires yield goodness as long as the driving force behind them remains noble. Same is the case with interest groups and political parties. The reason of stating that the two set of groups are conducive in attaining or working towards the common good is that these groups provide a platform to the general public around through which people can raise their voices, share their opinions, take part in decision making process, highlight their concerns and problems and reach such decisions which are acceptable and beneficial for all. In this regard, work of Rousseau holds a special place. According to him, people should be "sovereign" and the government should only be there to implement laws. He believed that laws shall be enacted by direct democracy, which followed that each person should directly be involved in law making through a platform.

Thailand Monarchy and Government Overview

Thailand Monarchy and Government Overview BACKGROUND OF MONARCHY The current king of Thailand, Bhumibol Adulyadej, is part of the Siamese-cum-Thai monarchy and has reigned since 9 June 1946. This has made him the world’s longest reigning current monarch and the world’s longest serving head of state ( ). In accordance with the constitution of Thailand, most of the king’s power is divulged to his elected government whereby the king is considered above partisan affair and uninvolved with the decision-making process ( ). As ceremonial head of state, however, the king still retains power in being the head of the Royal Thai Armed forces, the prerogative of royal assent and also in having the power of pardon. The current concept of Thai kingship has evolved through 800 years of absolute rule. The Siamese-cum-Thai monarchy dates back to the founding of the Kingdom of Sukhothai, by the first king of a unified Thailand: King Sri Indraditya in 1238 ( ). This early kingship showed signs of the religious influence that is still present in today’s monarchy and was said to be based on two concepts derived from Hinduism and Theravada Buddhist beliefs: the Vedic-Hindu caste of â€Å"kshatriya† (â€Å"warrior-ruler†) and the Buddhist concept of â€Å"Dhammaraja† (â€Å"kingship under Dharma†) after Buddhism was introduced to Thailand somewhere around the sixth century A.D ( ). â€Å"Kingship under Dhammaraja† essentially means that the king should rule his people in accordance with the Dharma and the teachings of the Buddha, thus showing early signs of the stronghold that Buddhism has had over the Thai monarchy from such an early stage. In 1279 the concepts behind Thai kingship were somewhat altered at the entrance of King Ramkhamhaeng to the throne ( ). The past traditions were replaced by the conept of â€Å"paternal rule† in which the king governs his people â€Å"as a father would govern his children ( ). However these changes lasted briefly as the Kingdom of Sukhothai was eventually supplanted by the Kingdom of Ayutthaya, which was founded in 1351 by King Ramathibodhi I ( ). The Ayutthaya period of kingship brought with it changes, re-establishing the former Hindhu and Buddhist concepts along with a third, older concept of â€Å"Devaraja† (â€Å"Divine-King†) borrowed by the Khmer Empire from the Hindu-Buddhist kingdoms of Java ( ). The concept was based on the idea that the king was an incarnation (Avatar) of the god Vishnu and that he was a Bodhisattva (enlightened one). This essentially meant the king had religious and moral power and purity of blood. State interests portrayed the King as a semi-divine figure which started to develop his image – through rigid cultural implementation – as an object of worship and veneration to his people. This broke away from the early concepts of kingship which emphasized strong bonds between the king and his subjects ( ). The monarchy from then on was largely removed from the people and became an absolute ruler and universal lord of his realm ( ). Kings demanded that the universe be envisioned as resolving around them, and expressed their powers through elaborate rituals and ceremonies. Although far less exaggerated, this notion of divinity and higher status of the monarchy is still present in Thailand today, where the king remains widely revered and serves as a spiritual leader to the state. Despite this seemingly ludicrous adoration of the monarchy in these early periods however, the kings that ruled over Ayutthaya for four centuries experienced some of the greatest periods of eco nomic, cultural and military growth in Thai history ( ). King Buddha Yodfa Chulaloke (or Rama I) established a new dynasty in 1782 and moved the capital from Thonburi to Bangkok. King Rama I also founded the House of Chakri, the current ruling house of Thailand ( ). During this Rattanakosin period the Chakri kings tried to re-establish the concepts of the Ayutthayan kingship and emphasize the connection between the sovereign and his subjects, but at the same time would not relinquish any power or authority from the throne. Most notably, Kings Buddha Loetla Nabhalai (Rama II) and Nangklao (Rama III) created a semblance of a modern administration by creating the supreme council and appointing chief officers to help with the running of the government ( ). This was a turning point in Buddhist influence within the monarchy and government giving the religion a firmer grip on the decision making processes ( ). BACKGROUND OF THE GOVERNMENT In June 1932 the influence and power of the monarchy was eventually challenged. After 150 years of absolute Chakri rule, King Prajadhipok was confronted with a group of foreign educated students and military men called â€Å"the promoters† who carried out a bloodless revolution, seizing power and demanding that the king grant the people of Siam a constitution ( ). The king agreed and in December 1932 the people were granted a constitution in which the power of the monarchy was divulged to the elected prime minister and national assembly, removing the political authority of the crown and founding a nascent ‘democracy’. ( ). 1946 saw the first direct elections held in which the people of Thailand voted for members of a bicameral legislature (Senate and House of Representatives) to be presided over by a Prime Minister representing the executive branch ( ). The Judiciary, including a Supreme Court, acts independently of the executive office and the legislature, though it was not until the 1996 constitution that more effective checks and balances were instituted ( ). From its inception â€Å"democracy† in Thailand has been turbulent, with 17 coup d’etats passing power back and forth between leaders of the military and an elite bureaucracy that borders on plutocracy ( ). Seventeen different constitutions have governed the country; the Kingdoms current constitution the result of the most recent coup d’etat; a bloodless overthrow of then Prime Minister Thaksin Shinawattra in 2006 ( ). Currently, Thailand is embroiled in political wrangling over the implications of that coup and the subsequent legislative shake up caused by mass protests both against and in favour of the former Prime Minister. Nevertheless, the Thai people are extremely politically active and value their freedom regardless of their tenuous democracy ( ). Under the 2007 Constitution (drafted by a military appointed council, but approved by a referendum) the present structure of the Government of Thailand was established ( ). Despite the seventeen constitutions, the basic structure of the government has remained the same. The government of Thailand is made up of three branches; the executive, the legislative and the judiciary, a system of government similar to that of the Westminster system of the United Kingdom. Along with the monarchy, this essay will pay special attention to both the legislative and judicial branches of this political system, and how they interact with Buddhist influences in the form of the sangha council.

Diversifying Teaching Styles to Meet the Needs of All Learners Essay

Diversifying Teaching Styles to Meet the Needs of All Learners When researching about education, one often finds a great deal of literature and information about learning styles. Educators spend countless hours studying their students in order to find out how they learn best. All students have needs when it comes to how they learn and educators must be able to meet those needs in order to promote successful learning in their classrooms. This (paper/article) will focus on teaching strategies and how to vary them so that each learning style preference is addressed, therefore increasing the level of achievement of each student and making learning a successful outcome in the classroom. Strategies, or methods of instruction, include the ways in which the content/information is transformed into new learning for the students. The content can be transformed directly from the teacher to the student through lecture, demonstration, drill and questioning, or more indirectly where the teacher's role is to facilitate learning situations through grouping, discovery, inquiry, role-play and simulations (Freiberg, Driscoll, 1996). Wilen, Ishler, Hutchison, and Kindsvatter (2000) stress that building a positive, supportive learning environment is an important goal for all teachers who want their students to succeed in learning. To maintain student interest and achieve higher results, they encourage teachers to use a variety of methods. They suggest four strategies for "generating an academic climate" in the classroom (p. 30): 1) be task oriented and aware of time. Teachers often find themselves in a situation, which limits the amount of time they can spend on a certain topi c. Therefore, it is recommended that teachers try to rema... ..., A. (1996). Universal teaching strategies (2nd ed.). Needham Heights, MA: Allyn & Bacon. Hyman, R.T. (1974). Ways of teaching (2nd ed.). New York: J.B. Lippincott. Mastropieri, M. A., Scruggs, T. E. (1991). Teaching students ways to remember. Cambridge, MA: Brookline Books. Ornstein, A. C. (1995). Teaching theory into practice. Needham Heights, MA: Allyn & Bacon. Plauche-Parker, J. (1989). Instructional strategies for teaching the gifted. Needham Heights, MA; Allyn & Bacon, Inc. Tuckman, B. W. (1991). "Derivation and description of and interpersonal construct model of teaching to help student teachers self-actualize." Paper presented an annual meeting of the American Educational Research Association, Chicago. Wilen, W., Ishler, M., Hutchison, J., Kindsvatter, R. (2000). Dynamics of effective teaching (4th ed.). New York: Addison Wesley Longman Diversifying Teaching Styles to Meet the Needs of All Learners Essay Diversifying Teaching Styles to Meet the Needs of All Learners When researching about education, one often finds a great deal of literature and information about learning styles. Educators spend countless hours studying their students in order to find out how they learn best. All students have needs when it comes to how they learn and educators must be able to meet those needs in order to promote successful learning in their classrooms. This (paper/article) will focus on teaching strategies and how to vary them so that each learning style preference is addressed, therefore increasing the level of achievement of each student and making learning a successful outcome in the classroom. Strategies, or methods of instruction, include the ways in which the content/information is transformed into new learning for the students. The content can be transformed directly from the teacher to the student through lecture, demonstration, drill and questioning, or more indirectly where the teacher's role is to facilitate learning situations through grouping, discovery, inquiry, role-play and simulations (Freiberg, Driscoll, 1996). Wilen, Ishler, Hutchison, and Kindsvatter (2000) stress that building a positive, supportive learning environment is an important goal for all teachers who want their students to succeed in learning. To maintain student interest and achieve higher results, they encourage teachers to use a variety of methods. They suggest four strategies for "generating an academic climate" in the classroom (p. 30): 1) be task oriented and aware of time. Teachers often find themselves in a situation, which limits the amount of time they can spend on a certain topi c. Therefore, it is recommended that teachers try to rema... ..., A. (1996). Universal teaching strategies (2nd ed.). Needham Heights, MA: Allyn & Bacon. Hyman, R.T. (1974). Ways of teaching (2nd ed.). New York: J.B. Lippincott. Mastropieri, M. A., Scruggs, T. E. (1991). Teaching students ways to remember. Cambridge, MA: Brookline Books. Ornstein, A. C. (1995). Teaching theory into practice. Needham Heights, MA: Allyn & Bacon. Plauche-Parker, J. (1989). Instructional strategies for teaching the gifted. Needham Heights, MA; Allyn & Bacon, Inc. Tuckman, B. W. (1991). "Derivation and description of and interpersonal construct model of teaching to help student teachers self-actualize." Paper presented an annual meeting of the American Educational Research Association, Chicago. Wilen, W., Ishler, M., Hutchison, J., Kindsvatter, R. (2000). Dynamics of effective teaching (4th ed.). New York: Addison Wesley Longman

History of the Philippines

CONTRIBUTION AND ACHIEVEMENTS General Emilio Aguinaldo (January 23, 1899 – April 1, 1901) To make it easier for you to master, always remember why Gen. Emilio Aguinaldo was on the 5-peso bill (which is not used anymore, instead his head-profile is on the 5-peso coin) bearing the Philippine flag at the celebration of the Philippine Independence Day, it’s because he was the  first president  of the Philippines First Republic (a. k. a. Malolos Republic). Contributions and Achievements of Emilio Aguinaldo: * first president * youngest president – he became the country’s leader at age 28 * longest-lived president – he died when he was 94 (wow! * one of the active leaders of KKK * signed the Pact of  Biak na Bato * known as the President of the Revolutionary Government * he fought against the Spanish and American to retain our independence 2Manuel L. Quezon (November 15, 1935 – August 1, 1944) Notable facts about Manuel Luis Quezon is that, h e is known as the â€Å"Father of National Language† (Ama ng Wikang Pambansa) and he died in Saranac Lake, New York due to tuberculosis. I’ve seen his life-sized wax statue inside the Quezon Memorial Circle, it was well crafted. Contributions and Achievements of Manuel L. Quezon: first Senate president elected as President of the Philippines * first president elected through a national election * first president under the Commonwealth * he created National Council of Education * he initiated women’s suffrage in the Philippines during the Commonwealth * he made Tagalog / Filipino as the national language of the Philippines * he appears on the twenty-peso bill * a province, a city, a bridge and a university in Manila were named after him * his body lies within the special monument on Quezon Memorial Circle 3 Jose P. Laurel (October 14, 1943 – August 17, 1945)Laurel was the third to sit at the office during Japanese occupation of World War II. He was the onl y Filipino president to have been shot outside of combat. Contributions and Achievements of Jose P. Laurel: * he was considered as the legitimate president of the Philippines * he organized KALIBAPI (Kapisanan sa Paglilingkod sa Bagong Pilipinas). * he declared Martial Law in 1944 * he and his family developed the establishment of Lyceum of the Philippines 4. Sergio Osmena (August 1, 1944 – May 28, 1946) Sergio Osmena was the second president of the Commonwealth; he succeeded Quezon after his death.Contributions and Achievements of Sergio Osmena: * he was 65 when he became president– making him the oldest president to hold office * he was the first Visayan to become president * he joined US Gen. Douglas McArthur in Leyte on October 20, 1944 starting the freedom of the Philippines from the Japanese during World War II * during his time, the Philippine National Bank has been rehabilitated and the country joined the International Monetary Fund * on his time, the Bell Trad e Act was approved by the US Congress * Sergio Osmena appears on the 50 peso bill Manuel Roxas (May 28, 1946 – April 15, 1948) Roxas was the fifth president of the Philippines overall but he was considered as the third and last president under the Commonwealth and the first of the Third Republic of the Philippines. He only sat in the office for 1 year, 10 months and 18 days. Contributions and Achievements of Manuel A. Roxas: was inaugurated as the new and first president of the new Republic because the Philippines was finally free after the WW II * in his time, the country has started reconstruction from war damage and the Philippines started breathing without foreign rule * under his term, the Philippine Rehabilitation Act and Philippine Trade Act laws were accepted by the congress * he is in the 100 peso bill 6,Elpidio Quirino (April 17, 1948 – December 30, 1953) He was the vice president at Roxas time. He became president when the latter died in 1948. Contributions and Achievements of Elpidio Quirino: under his term Hukbalahap movement was active * he created Social Security Commission * he also created Integrity Board to monitor graft and corruption * in 1948, Quezon City was the capital of the Philippines * peso and dollar exchange rate at his time was 1 US = P2 7. Ramon Magsaysay (December 30, 1953 – March 17, 1957) He was born in Iba, Zambales, was a military governor, and engineer. He died on a plane crash on Dec. 1957, boarding the presidential plane named â€Å"Mt. Pinatubo Contributions and Achievements of Ramon Magsaysay: * was a chairman of the Committee on Guerilla Affairs was the first president sworn into office wearing  Barong Tagalogin his inauguration * his presidency was referred as the Philippines’ Golden Years for it was the cleanest and zero-corruption * the Philippines was ranked 2nd  in Asia’s clean and well-governed countries * he established National Resettlement and Rehabilitation Administrati on (NARRA) among his agrarian reforms 8,Carlos P. Garcia (March 18, 1957 – December 30, 1961) Another lawyer, Carlos P. Garcia was a poet, teacher, and guerilla leader too. Born from Bohol, he was the vice president of Magsaysay and secretary of Foreign Affairs for 4 years.He became president when Magsaysay died in 1957. Contributions and Achievements of Carlos P. Garcia * he was known for  Ã¢â‚¬Å"Filipino First Policy† * he established the Austerity Program focusing on Filipino trade and commerce * was known as the â€Å"Prince of Visayan Poets† and the â€Å"bard from Bohol† * cultural arts was revived during his term * was the first president to have his remains buried at the  Libingan ng mga Bayani 9. Diosdado Macapagal (December 30, 1961 – December 30, 1965) He was born in Lubao, Pampanga, Diosdado Macapagal is the father of Gloria Macapagal Arroyo, the 14thand second woman president of the Philippines.He was a lawyer and a professor, too. Contributions and Achievements of Diosdado Macapagal: * he established the first Land Reform Law * he placed the Philippines currency – peso, on the currency exchange market * he made June 12 1898 as the Philippines’ Independence Day * he signed the Minimum Wage Law * he signed the creation of the Philippine Veteran’s Bank 10,Ferdinand Marcos (December 30, 1965 – February 25, 1986) Born from Sarrat, Ilocos Norte, Ferdinand Edralin Marcos was a lawyer and Senate President for 3 years.He was president for 21 years and only quit office after the People Power Revolution. His wife,  Imelda Marcos  became quite popular in the world too. His term was the most controversial and messy one because of Martial Law and People Power although Marcos has contributed a lot of nice things in the Philippines. He was  one of the best and brightest presidents  even though their family was rumored to have embezzled public funds to Switzerland and other wealthy countrie s. Contributions and Achievements of Ferdinand Marcos: * he was the first president to win a second term * he declared Martial Law on Sept. 2, 1972 * he increased the size of Philippine military and armed forces * in 1980, GNP was 4 times greater than 1972 * in 1986, the Philippines was one of the most indebted countries in Asia * he built more schools, roads, bridges, hospitals and infrastructures than all former presidents did combined * is the only president whose remains interred inside a refrigerated crypt 11. Corazon Aquino (February 25, 1986 – June 30, 1992) The first woman president of the Philippines and the first woman president in Asia, Cory Aquino is the wife of Benigno Aquino Jr. (who was assassinated during Marcos regime).She was born in Paniqui, Tarlac Contributions and Achievements of Corazon Aquino: * was named â€Å"Woman of the Year† in 1986 by Time magazine * first woman president of the Philippines and Asia * she’s known to bring back democr acy in the country * she abolished 1973 Marcos Constitution brought the new Constitution of the Philippines * she reorganized the structure of the executive branch of government * signed the Family Code of 1987 and 1191 Local Government Code * she always initiated charitable and social activities helping the poor and the needy * she’s been cited as a modern-day Joan of Arc by many she is in the new 500 peso bill together with her husband Ninoy Aquino she has received great honors and awards such as one of: * 100 Women Who Shaped World History * 20 Most Influential Asians of the 20th  Century * 65 Great Asian Heroes * a recipient of J. William Fulbright Prize for International Understandin 12. Fidel V. Ramos (June 30, 1992 – June 30, 1998) FVR was the chief-of-staff of the Armed Forces of the Philippines before he became president. Unknown to many, he’s also a civil engineer. He brought back economic growth and stability in the country in spite of the Asian Fin ancial Crisis in 1997.He is the first and only non-Catholic president of the Philippines. Contributions and Achievements of Fidel V. Ramos * during his time, the Philippines was cited as  Asia’s Next Economic Tiger  because he brought back economic growth * the Philippines celebrated Centennial Independence in 1998 * he’s the only Filipino who received  British Knighthood  from the United Kingdom, bestowed by Queen Elizabeth II (Knight Grand Cross of the Order of St. Michael and St. George) * he led the 4th  APEC Summit held in the Philippines his â€Å"Philippines 2000† vision made the Philippine Stock Exchange one of the best in the world in the mid-90s * Death Penalty was reinstated at his time * he signed peace talks and agreement with the MNLF 13. Joseph Estrada (June 30, 1998 – January 20, 2001) Known as Erap, he was the first president who was a famous film actor. His governance had so many downs due to controversies, impeachment and slow economic growth. I think he’s the first president who has been impeached and the second one who was forced to leave the office because of People Power III in Edsa.Philippine economy was at its worst because of leadership uncertainty. Contributions and Achievements of Joseph â€Å"Erap† Estrada: * during his time, the MILF’s headquarters and camps were captured * he joined other leaders and politicians who supported against the Charter Change * was cited as one of the Three Outstanding Senators in 1989 * was among the â€Å"Magnificent 12† who voted for the termination of the Philippines and US Military Bases Agreement from Clark Airbase and Subic Naval Base 14.Gloria Macapagal Arroyo (January 20, 2001 – June 30, 2010) Gloria Arroyo, daughter of ex-president Diosdado Macapagal, was the second female president of the Philippines. She was 14 when she moved and lived in the Malacanang Palace. Oakwood Mutiny occurred on her term. There were also lots o f messy controversies against Gloria like impeachments and the Hello Garci disgrace but Gloria has known to have contributed big record for road, bridges infrastructures and higher economic growth than the past 3 presidents term did.Amid the 2008 global financial crisis, the Philippines still had an impressive GDP growth and it was so hard to keep it afloat but she did. Contributions and Achievements of Gloria Macapagal Arroyo: * second female president of the country * first and only female vice-president of the Philippines so far (to date) * first president to had oath taking outside Luzon an ex-professor of Economics at the Ateneo de Manila University where Noynoy Aduino was one of her students * an ex-classmate of former  US president Bill Clinton  at Georgetown University’s Walsh School of Foreign Service where she maintained Dean’s list status * she regained  higher economic growth than the past 3 presidents before her * Philippine economy grew at its faste st in 3 decades in 2007, GDP exceeding 7% growth * US ex-president Bill Clinton cited Gloria’s â€Å"tough decisions† because of her brilliant strategy to make the country's economy back in shape amidst the 2008 global financial crisis * Peso became the best performing currency of the year in Asia in 2007 * eVAT Law was implemented under her term * she is currently in the 200 peso bill 15 Benigno Aquino III (June 30, 2010 – present) Son of the first female president of the Philippines and Asia – Corazon Aquino, Benigno Aquino III Aquino a. k. a. NoyNoy joined the House of Representatives and the Senate before his presidency. He is the first president who is a bachelor, unmarried and has no children.Contributions and Achievements of Benigno Aquino III: * he created the no wang-wang policy and this was practiced on his inaugural address * he assigned the notable Jesse Robredo as the secretary of DILG in 2010. * he initiated the K-12 education in the Philipp ines * he renamed the Office of the Press Secretary into Presidential Communications Operations Office and appointed new officers * he signed an EO about suspension of allowances and bonuses of GOCCs and GFIs board members * has paved peace in Mindanao thru the Bangsamoro Islamic Freedom Movement * in 2012, the Philippine economy grew 7. 1% besting other South East Asian countries

Song of a Hummingbird

Sophia Rocha Mike Fraga CHI 100 November 16, 2012 Book Review The novel, Song of the Hummingbird by Graciela Limon, is a book about Huitzitzilin’s encounters during the Spanish conquest and the coming of Cortes. There are many themes in this novel, such as war, religion, culture, sins and the ending of an Era for the Mexicas. But it does not start off of her telling her stories, but of a young monk named Father Benito Lara, who is called to hear her last confession, for she was very old and knew she was near the end of her long journey.Father Benito went to listen to Huitzitzilin everyday for she had much to say about her life and about her culture before and during the Spanish conquest. She told him some sins throughout their conversations, and when she did not talk about their sins, he would write down all that she was saying so he can record her side of what happened during the conquest, for he only heard teachings of how the Spaniards had seen the conquest. The novel start s of in a convent at Coyoacan in 1583.Father Benito is only 27, and Huitzitzilin is 82. As Huitzitzilin starts her story, it is spring in the year 1501 when she was born. She describes her growing up in her tribe and of her traditions and customs. Some of these disturbed the monk because he felt that they were devil worshipers and did not want to hear such chants for he feel the devil will try to pull him in. Huitzitzilin tried to tell him that she was not a devil worshiper, but she has gods of her own that she did worship.He was taught differently of her tribe and did not understand most of the things she had to say, but he still listened for he was fascinated by most of the things she had to say about her life and about her tribe. Graciela Limon is arguing for Huitzitzilin, for the way she wrote this novel explained in detail Huitzitzilin’s journey through all her hardships she had to face during the time of the Spanish conquests. Limon did not suppress how Huitzitzilin loo ked in any way throughout the novel. She wrote the story as f she was Huitzitzilin herself, and just wanted to have her story told. Huitzitzilin’s character had a lot to say about her life and after every conversation she felt better after confessing her sins, for she felt a burden was being lifted of her shoulders. One theme of the novel is religion. Religion is a theme throughout the whole novel, for Father Benito kept referring to God and about his Christianity every time Huitzitzilin talked about her gods of about some of her traditions. â€Å"No! Don’t mention the idols! Father Benito’s voice trembled, betraying the fear the god’s name conjured his mind. â€Å"No? But if you don’t allow me to speak of them, how can I explain the most important part of those events? † The monk was dumbfounded. Yet he had promised Father Anselmo that he would not allow allusion to those demons. He bit his lip in consternation because he couldn’t h elp thinking that it would be equally difficult to speak of his own people without the mention of Jesus Christ. † He kept reminding her that it was a great thing that the Spaniards brought Christianity amongst them.She repeatedly told him that she did not believe in his ways or in God, for she only seeked the forgiveness of Father Benito, not of God. â€Å"Will you forgive me? † â€Å"God forgives all sins if there is contrition. † â€Å"But will you forgive me? † In the end of the novel he understood why she kept asking for his forgiveness, for it was not for mercy or absolution but for understanding of her life. Another theme was sins, for Huitzitzilin confessed sins to Father Benito during her conversations. Her first sin was fornication with Zintle by the lake.But the way she told her sins to him bothered him for she told them in exact detailed of the way she remembered it. Her second sin she told was abortion. She was pregnant with Zintles child and s he went to a healer that knows about some herbs that can get rid of the unborn child. She was not sorry for that sin for her and the priest argued about it. She argued she did that for the sake of her own life, for if her husband to be found out about her fornication, he would have her killed. After hearing what her husband to be, Tetla, did to her the night of their wedding, he began to feel sorry for her.

Gender discrimination in US Politics essays

Gender discrimination in US Politics essays The concept of "a sense of place" denotes more than physical space. In sociological terms, a sense of space refers to the meanings people attach to the place or environment. This thus includes the orientation of people towards that place, the understandings and feelings that people generally attach to that environment (Hummon 253). These meanings could take on different forms. In some contexts, the sense of place could be a cohesive force that pulls people together into a community. In other cases, the sense of place may involve alienation, resulting in people who do not identify with a certain space or who may be prevented from full participation (Hummon 278). This concept of a sense of place as alienation can be seen at work in the United States Congress. When Congress was initially convened in 1774, women could not vote, much less hold office. Both the Senate and the Lower House acquired a very strong masculine sense of space. It would not be until 1917 when a woman would break into this masculine space. Today, there 13 women in the Senate and 59 women in the Lower House (Elvin). This could be seen as a sign of improvement, since there are more women serving in the 108th United States Congress than at any other time in history. However, despite the record numbers, women constitute only 16 percent of the legislators in the country. Furthermore, the number of women holding office in the state level has dropped by 12 percent this year In fact, despite the record increase, the United States trails its European counterparts and many other developing nations in terms of women in Congress. Despite its global economic dominance, the United States trails five dozen other countries in the percentage of women serving in national legislatures. Furthermore, the United States has not had a female Thus, despite recent advancements, the Uni ...

Liquid and Other Types of Lunch

Liquid and Other Types of Lunch Liquid and Other Types of Lunch Liquid and Other Types of Lunch By Maeve Maddox Until recently, I’d assumed that lunch was a clipping of luncheon. Come to find out, the words originated separately. According to the OED, luncheon is of uncertain origin, but lunch is thought to have come from Spanish lonja, â€Å"a slice.† Both luncheon and lunch first referred to a thick piece of something, such as â€Å"a hunk of bread.† In time, both words came to mean â€Å"a light repast between mealtimes.† On the Ngram Viewer, lunch and luncheon cruise along in tandem until about 1880, when lunch pulls ahead. Luncheon peaks in the 1920s and then declines. By then, some middle class speakers had come to believe that lunch was a slang word derived from luncheon and complained about its use by the younger generation. Both words still refer to a meal lighter than dinner, but now have markedly different connotations. A Google search shows 625,000,000 results for lunch compared to 43,200,000 for luncheon. The latter has acquired connotations of formality and a kind of prissiness that do not attach to lunch. One â€Å"has lunch† but â€Å"attends a luncheon.† A Web search suggests a certain gender bias: â€Å"ladies’ luncheon† brings 374,000 results compared to 34,900 for â€Å"men’s luncheon.† The word lunch has found its way into several idioms. out to lunch A person who is â€Å"out to lunch† is unaware of what is going on around him: One [presidential] candidate is simply out to lunch, unaware until recently that there was even such a thing as Common Core. to lose one’s lunch â€Å"To lose one’s lunch† is â€Å"to throw up or vomit†: Once  the sight  would have  made me lose my lunch, but it didnt anymore. Was it a bad sign that I didnt throw up on the corpses anymore? to eat your lunch To have someone â€Å"eat your lunch† is â€Å"to be soundly defeated in some competition†: If you don’t develop a marketing strategy, your competitors will eat your lunch. no such thing as a free lunch All services, gifts, and ostensibly generous gestures will have hidden costs that the recipient must pay in the end: On the Internet, as elsewhere in life, there is  no such thing as a free lunch. [Free or low-cost online services need to be paid for somehow.] liquid lunch A â€Å"liquid lunch† is a â€Å"midday meal that leads to drunkenness.† An alarming 76 per cent of employees are coming back to work drunk after taking a â€Å"liquid lunch,† according to a new survey. Want to improve your English in five minutes a day? Get a subscription and start receiving our writing tips and exercises daily! Keep learning! Browse the Vocabulary category, check our popular posts, or choose a related post below:Arrive To vs. Arrive AtFor Sale vs. On Sale40 Words Beginning with "Para-"

Arguments on Spanking

Three reasons people do not believe spanking is that spanking can cause harmful side effects, spanking is not more effective than other punishments, and spanking promotes child violence. Some of the harmful side effects that spanking can cause are children with depression, poor academic outcomes, or problems in the second half of life. Since side effects usually do not appear immediately, it is impossible to see side effects. It is also thought that spanking can not prove to be more effective than any other punishment. One of the main arguments supporting spanking is that it does not lead to any discipline. One of the main arguments for fighting spanking is that in more than 80 studies on spanking, the results of the survey show that more children experience more corporal punishment, they show more serious behavior. Review of the literature provides a background to understand how spanking affects children. Research on corporal punishment (physical) punishment is defined not as correc ting or managing children's behavior, but as use of physical strength to give children a pain 1. Corporal punishment by law 7. In general, spanking and slapping that do not cause serious physical harm are considered acceptable corporal punishments. Corporal punishment is often escalated to child abuse, Children's Corporal Punishment: Slapping. Standpoint of Inverse Span. Religious Tolerability: Abusing may escalate. As spanking for a while, it is common for parents to repeat spanking when a child is misbehaving. More serious spanking It may become abuser beyond the reasonable power threshold. Corporal punishment often reacts innocently to child's behavior excessively Jan Hunt. 10 reasons not hitting children natural children project: 2. In many cases of so-called bad behavior children are basic Ignore the needs, respond only to your own needs according to your age and experience. Sleep and nutrition, hidden allergy treatment But his greatest need is his parents concentration.

The Origin of Government Involvement in Health Care Delivery in the Un Assignment - 3

The Origin of Government Involvement in Health Care Delivery in the United States - Assignment Example The legislation was passed by the Congress in 1965 that established the Medicare as title 18and Medicaid program as title 19 of the social security act found on page 3. Title 18 that refers to Medicare in the social security act allocated health insurance for the aged and disabled. The social security act amended the Medicare legislation in 1965. It established a health insurance program. It was meant for the aged persons, in order to make up for retirement. It also catered for survivors and covered disability insurance health benefits. This was under title two of the social security act. (pg.6) Another component of the social security act is title 19. This is a federal or a state entitlement program. This one provides financial aid to certain individuals and families who have low income and scarce resources. In 1965 the Medicare program became law. It is regarded as a cooperative venture, whose financial problems are covered for by both federal, and the state government. This includes the District of Columbia and the territories. Their participation was in order to assist the states in providing sensible medical assistance, to particularly needy people. As a result, Medicare became the biggest source of financial support. This covers medical and other health-related services for people who are financially challenged. Title 21 covers the Children Health Insurance Program (CHIP). From March, it is now known as the State Children’s Health Insurance Program. It caters for children from financially challenged families that do not qualify for Medicaid. It was brought into place by the Balanced Budget Act (BBA) of 1997. This is found in (Public Law, 105-33) The term â€Å"managed care† refers to the use of financial incentives and the structure of an organization, in order to reach its objectives. Its purpose is to upsurge efficiency and lessen healthcare budget. Benchmark is a term used to refer to something or a method, which can be used as a means to evaluate and assess the level, or quality of things that are related.     

Quranic and Biblical Depictions of Sulayman Research Paper

Quranic and Biblical Depictions of Sulayman - Research Paper Example The author of the paper tells that when comparing the two texts, some key differences in the depiction of Sulayman/Solomon is revealed. Firstly, in the Holy Koran, the emphasis was laid on Sulayman's role as a Prophet, whereas in the Holy Bible he is portrayed as a King. And to go with the notion of a prophet, Sulaiman was endowed with supernatural powers such as the power to move wind. The following select quotations from Abdul Haleem's translation of the Holy Koran illustrates this point: â€Å"And (We made) the wind subservient to Sulaiman whereof the morning course was a months journey and the course a months journey." (54:12) "So We subjected the wind to his power, setting fair by his command whithersoever he intended" (38:36) "And unto Sulaiman, We subdued the wind in its raging. It flows by his order towards the land which We had blessed And of everything We are aware." (21:81)† Seen from an Islamic point of view, one need not see any contradiction in designations such as a Prophet or a King, for, in the Islamic tradition, most Prophets happen to be Kings and vice-versa, including Prophet Muhammad himself. Secondly, in the Holy Koran, Sulayman is said to have lived only 53 years; whereas The Bible suggests that he lived longer than that. Other minor differences in the two versions pertain to minor linguistic differences such as King David (the father of Solomon) being referred to as Prophet Daud in the Holy Koran. As for similarities, the historical/religious character in question is said to have gathered knowledge from his illustrious father.

Windows Vulnerability Research Paper Example | Topics and Well Written Essays - 500 words

Windows Vulnerability - Research Paper Example This report highlights the details of attacks conducted using this vulnerability, the systems that are vulnerable to this attack, the consequences and effects of the attacks, document some cases where such attacks have taken place and finally explore the fixes that exist so far. As stated above, such an attack takes advantage of the design flaws in transport layer, such that the attacker is able to intercept secure traffic from the target computer. In this way, the attacker could make use of an enticing website to attract a user within the organization. Any processing handled on that website, could trigger sensitive information to flow to the attackers website. A successful attack would be possible if the attacker is able to decrypt the traffic from the target systems, which is normally encrypted. However, the vulnerability will not be extended to users of SharePoint 2010 and Microsoft internet information services (IIS7). These systems will function normally with no fear of remote attacks unless they are deployed on machines with the above named operating systems. The uncontrolled and unauthorized access to target systems creates a channel that the attacker can use to acquire the organization’s sensitive data or plan future attacks. This means, sensitive information could be leaked to competitors; thus, diminishing any competitive advantages that may have existed. Currently, there are no reported cases of attacks conducted by exploiting this vulnerability. According to a vulnerability alert, this exploit has been unproven (Cisco). However, this does not belittle the fact that the vulnerability still exists and measures should be taken to ensure that the organization’s data is safe. Given the fact that this vulnerability can be exploited through remote means, it is important to ensure that the filters and checks are put in place to control

Becoming agile through mindfulness 2 Assignment

Becoming agile through mindfulness 2 - Assignment Example There are two types of mindfulness; organizational and individual. This classification is done to provide a clear distinction between the abilities of an organization or an individual. Individual mindfulness entails an individual’s ability to regularly come up with new categories in the interpretation and perception of the universe. Organizational mindfulness, on the other hand, refers to the cognitive aspects used to solve problems on an organizational level (Butler and Gray, 2006). Organizational mindfulness entails the continuous refinement and scrutiny of existing expectations depending on the ever changing environment. Such refinement and scrutiny ensures that uncertainties are handled accordingly (Weick and Sutcliffe, 2001). The following are the components that make up organizational mindfulness. Reluctance to Simplify Interactions – this refers to the ability of an organization to recognize complex processes and situations and find ways to view the problem from different angles (Nagle, McAvoy & Sammon, 2011). An organization that employs this component is able to identify different ways of handling complex issues, and situations that occur during the software development process. This is because all the views and opinions of the participants of the software development team are highly valued (Nagle, McAvoy & Sammon, 2011). For an organization to employ this component during the development, one of the following factors has to be included in the development process; 1. The participants should be free enough to express their ideas and opinions in regard to the development process. One of the participants of the Cork workshop talks of the aspect of incorporating the customer in the development process. When explaining to her colleagues about how the customer makes changes to the development process, one of the other participants questions whether there was a way to avoid all the changes imposed by the customer. He asked, â€Å"So there was n ot stopping that?†(21:07). This participant was concerned with the organizations over flexibility towards the customer. However, he was interested to learn whether the other participant felt the same. Being mindful of his colleague, he did not impose his opinion on her; instead he gave her a chance to express herself. After being given the chance to speak, the female gives her view. She says; â€Å"No, actually it’s a very positive thing, that’s to be welcomed because actually it’s put our project in front of the chief executive its put their client’s role within the organization in a higher level of importance and is actually informing the organization better about what they do, so those changes are actually quite nice† (21:08). 2. Analysis of customer requirements or any requirements should be prolonged. This goes a long way to ensure that all participants or stakeholders of a development process are fully aware of the current state of affa irs. Discussions that are held during the course of the development process should be conducted in such a manner that all those who do not fully grasp the situation are able to do so by the end of the discussion. This involves clarifying issues to persons who may not understand any technical jargon used. During the workshop held in Cork many

ASEAN Essay Example | Topics and Well Written Essays - 2000 words - 1

ASEAN - Essay Example ASEAN has made exemplary pursuit in achieving this objective for the South East Asian countries. The achievement of ASEAN in this region is commendable. There are various challenges that this organization faces in maintaining its principle objective of economic strength, peace and security of the region.. In the forthcoming years, it is imperative that ASEAN strengthens its political-security support system due to the increasing threat of international terrorism that may prevail in this region. This is imperative to attain and sustain its primary goal. Association of south East Asian nations or ASEAN consists of the countries from the south East Asian region that work towards mutual economic progress. It can be defined as an organization for cooperation on security and economic concerns. [Mead, ,n. d, 207] The creators of the Association of South East Asian Nations – ASEAN, visualized it as ultimately assembling all the nations of the region and managing them to lend a hand in assuring the peace, permanence and growth of the area. While the area was in a state of turmoil, a lot of nations were under pressure for the existence of the nation or autonomy. First of all the five founding states had planned that ASEAN will be, in keeping with its abbreviation distinctly suggesting a unity of South East Asian countries working together willingly for the mutual betterment. The basic objective of the organization was tranquility, financial, societal and cultural progress, and the perception being: with tranquility in the area, stabi lity will not be far behind that would result in the financial affluence of the population in the area. It was not destined to be a supranational identity, discharging its objectives discretionally of its member nations: It was not to have any regional parliament or authority to frame regulations; devoid of a judicial system and having no authority of executing powers. United

Interpersonal Communication Essay Example | Topics and Well Written Essays - 1500 words

Interpersonal Communication - Essay Example First, I am very opinionated. I do not necessarily have an opinion on every issue, but when I set my opinion on a certain issue, it is most probably because I evaluated the idea carefully and thoroughly. I have always thought that being such, I have the right to force my opinion on other people. I am usually like this with my friends, or those who are around my age bracket. I have no bad intentions in doing so. Usually, I become forceful in talks when I feel like I am doing the other person a favor by correcting his or her mistake. I usually put their opinion on the hot seat, and then point out the areas why that opinion is a mistake. I do it in a matter-of-fact manner that I usually do not care if the other person is getting offended or hurt. I notice that the other person will usually just say yes to me to close the topic, or keep quiet until he or she finds an opportunity to change the subject. Second, I have always believed that when I am right, I need to prove it. Sometimes, I go to lengths such as dissecting the issue just to show the other person that I was right. I do not have an issue in admitting that I am wrong if I am wrong, that is probably why I expect other people to be the same. I usually do this with my parents, especially when I feel that they underestimate my ideas just because I am younger and have lesser experiences than they have.I do not feel, however, like scoring points. ... I do not feel, however, like scoring points. I just want them to realize that there are times when I am right too. However, such conversations would end up either heatedly or with me being forced to shut up, which I do not appreciate. This would make me put a double effort in proving that I am right (usually by bringing up past conversations or arguments) when the next opportunity comes. Third, despite being opinionated and having strong character, I am a very happy person to be with. However, I seem to be very direct, or my sense of humor sometimes offends others who are a bit sensitive. For me, it is usually to break the ice or to encourage a cheerful mood when it gets awkward or dull. I always make it a point to be politically correct, but others still see my sense of humor as insensitive sometimes. While my upbeat personality may draw people to me and make them generally happy to be with me, I want to change some of my communication styles because I do not like offending or hurti ng people unnecessarily, even if they had been unintentional. Research on Self-Analysis of Communication Styles I have recently noticed how easy it is for my conversations with people who are close to me to go around in circles. What starts as a normal conversation would lead to an argument. Looking back to all those times, a big percentage of those arguments were due to trivial matters. I figured out it must have something to do with my communication styles. I remember a famous line that says, â€Å"It is not what you say, but how you say it.† This is the major point of my research regarding interpersonal communication. I believe that what is flawed is not my intention nor my message, but how I express my thoughts. As I have earlier mentioned, I

ASEAN Essay Example | Topics and Well Written Essays - 2000 words - 1

ASEAN - Essay Example ASEAN has made exemplary pursuit in achieving this objective for the South East Asian countries. The achievement of ASEAN in this region is commendable. There are various challenges that this organization faces in maintaining its principle objective of economic strength, peace and security of the region.. In the forthcoming years, it is imperative that ASEAN strengthens its political-security support system due to the increasing threat of international terrorism that may prevail in this region. This is imperative to attain and sustain its primary goal. Association of south East Asian nations or ASEAN consists of the countries from the south East Asian region that work towards mutual economic progress. It can be defined as an organization for cooperation on security and economic concerns. [Mead, ,n. d, 207] The creators of the Association of South East Asian Nations – ASEAN, visualized it as ultimately assembling all the nations of the region and managing them to lend a hand in assuring the peace, permanence and growth of the area. While the area was in a state of turmoil, a lot of nations were under pressure for the existence of the nation or autonomy. First of all the five founding states had planned that ASEAN will be, in keeping with its abbreviation distinctly suggesting a unity of South East Asian countries working together willingly for the mutual betterment. The basic objective of the organization was tranquility, financial, societal and cultural progress, and the perception being: with tranquility in the area, stabi lity will not be far behind that would result in the financial affluence of the population in the area. It was not destined to be a supranational identity, discharging its objectives discretionally of its member nations: It was not to have any regional parliament or authority to frame regulations; devoid of a judicial system and having no authority of executing powers. United

When using different metals Essay Example for Free

When using different metals Essay An example of this is when an iron nail is put in a copper sulphate solution. A displacement reaction only occurs when a metal reacts with an acid. This is an exothermic reaction. Exothermic means that the energy is going out of the reaction. Chemical reaction where the energy content of the products is less than that of the reactants; heat is given out from the system. In an exothermic reaction, heat energy is given off to the surroundings so the product molecules have lower heat content than the reactants. This is like taking a wet sponge and squeezing it into a funnel the sponge ends up with lower water content than before the exothermic reaction. The amount of water which is squeezed into the funnel and collected is a good concrete way to visualize the heat of reaction. Apparatus: Measuring Cylinder Thermometer Stop clock Balancing Scale Copper sulphate solution Beaker Zinc Lead Aluminium Magnesium Iron Method: == Collect all required equipment in a tray. == Put 50 cubic cm of copper sulphate solution into a beaker make sure it is 50 by using a measuring cylinder. == Measure temperature of solution at the begging by using a thermometer. == Measure 2 grams of metals with copper sulphate solution. == Shut the beaker with a lid made out of cardboard for the thermometer to enter. == Measure temperature of substance every 30 seconds. == Repeat for 8 mins. == Repeat this routine for the other metals. Prediction: I predict that magnesium will displace most of the other metals it will react with. This is because magnesium is the highest metal we are using in the reactivity series and as such will displace more. Results: Iron 1 2 3 Average Graph Analysis From this investigations results I can see that Magnesium was the most reactive metal out of them, and Lead was one of the metals that reacted the least, along with Zinc. Magnesium emitted the most heat out of them all. It took several minutes for magnesium to reach its highest temperature on the table. My prediction was correct as I predicted that Magnesium would be the metal that emitted the most heat, as it was the more reactive than the other metals. Evaluation In this experiment I investigated how much heat displacement reactions give out. We used plastic beakers but used cardboard lids, which may have altered the results of the experiment. If I were to do the same experiment over again I would use plastic lids and see if the results were the same or if they differed. We also hand stirred the solutions, so that could have changed the results. I could improve the experiment if the same person stirred it then they would know roughly at what speed they stirred the solution. Rina Bhudia Science Investigation 10 B3 Mrs Davis Show preview only The above preview is unformatted text This student written piece of work is one of many that can be found in our GCSE Patterns of Behaviour section.

Aluminium Wings Verses Composite And Future Wing Materials Engineering Essay

Aluminium Wings Verses Composite And Future Wing Materials Engineering Essay The comparison of the properties of the materials used in aluminium and composite wings and the advantages and disadvantages of which they both possess and make them suitable for use within the manufacture of wings. A discussion of future materials which have been developed and are suitable for the use in wings will also take place. Collected information came from appropriate websites and books. Aluminium is the widest used material for the manufacture of aircraft wings to date since the first time it was used in the 1920s. Now the use of composites is becoming greater utilized in the manufacturing of aircraft wings at present instead of traditional aluminium wings. This is mainly to do with the weight saving properties that composites can posse. Weight saving properties is just one of the advantages of composite materials, another can be stiffness, but there are also disadvantages to using composites compared to aluminium, such as if they get damaged they need replacing immediately unlike aluminium which is very tolerant to damage. Aluminium production and repair is also much easier than that of composites. Aluminium and composites both have their own advantages and disadvantages and their properties have to be taken into account before any material changes are made. Future developments will hopefully provide a material that which will provide sufficient advantages and mini mal disadvantages compared over composites or aluminium. This report will look at the Boeing 737, which features aluminium wings, and the Boeing 787 dreamliner, which incorporates composite wings, and refer to them for the comparison of the different properties and structures of the two wing types. It will look at each type of material found in a traditional aluminium aircraft wing structure at present and will go into depth about the use of composites in wings instead of aluminium at present and in the future. The types of composites used, as well as investigating whether the structure of the wing had to be altered to compensate for the different properties of the composites will be discussed. The strength and weight properties of each different type of aluminium and composites used in an aircraft wing will also be examined. Types of corrosion which occur on an aluminium wing, including the inspection and repair of it will also be included, as well as the inspection and repair of composite materials and the types of damage which can occur in composites, such as delamination. The cost of production and repair of composites compared to aluminium and aluminium alloys, as well as the weight saved resulting in lower running costs for the company will be examined. The collected information will then be compared and advantages and disadvantages of each type of wing will be produced. It will also look at future aircraft wing materials, such as the use of incorporating aluminium with composites, and if they will change the way aircraft looks at present. The different properties of the new materials will also be examined and compare to the properties of both aluminium and composite wings. An overall conclusion of all the main findings and collected information will also be given. Recommendations will also be given at this point. Methodology After deciding what the topic of the report was going to be about, the research undertaken would need to be relevant. The first part of the study was to find information about Aluminium wings and the materials and structures which made them. This part incorporated finding and recording relevant information from certain websites off the internet. Another source used was finding appropriate books which gave suitable information about the subject in hand. Finding information on composite materials and structures was carried out by the same method. Locating appropriate information about future aircraft wing materials was carried out only with the use of the internet. Findings Aluminium wings Types Aluminium (Al) has been used in aircraft since the 1920s due to it being lightweight while also being relatively strong. It is used over steel as aluminium is three times the density less then that off steel, this means that for the same density the aluminium would be three times thicker, resulting in it being much stronger. Aluminium is also has good corrosion resistance, which is an advantage as an aircraft is subject to all weather conditions. Nowadays aluminium is joined with other elements to change the properties of the metal, improving specific areas of it, creating an aluminium alloy. At the present time, Aluminium alloys make up a vast total of a commercial aircrafts unloaded weight. Alloys Adding different elements to aluminium improve different properties, for example adding zinc to aluminium will improve the strength of the material. The added zinc allows the aluminium to be heat treated, where the metal is heated and cooled which in turn changes the structure of the metal along with its properties. More than one element can be added at the same time resulting in different properties being produced from having the same main alloying element. Even tho some of the properties of the aluminium will improve, the alloying elements need to be correctly chosen as other properties within the metal will be sacrificed. Certain aluminium alloys are used in the manufacturing of aircraft wings, the types of aluminium alloys, along with where it is used, the elements which are used to create the alloy and the improved properties are listed in the table below. Al Alloy Area Used Elements (%) Properties 7178 Spars, Beams, upper wing skin Zinc, magnesium, copper High compressive strength to weight ratio 7055 Lower wing skin Zinc, magnesium, copper Improved stress corrosion and fatigue resistance 7075 Wing ribs zinc Improved stress corrosion cracking resistance, high mechanical properties 2024 Slats, flaps copper Good fatigue performance, fracture toughness, slow propagation rate The Boeing 777 also uses the aluminium alloy 7055 due to it having a greater compressive strength than other alloys that had been tried before. Due to this, it was able to be used in the manufacture of parts of the wing, in the stringers and the upper wing skin. Corrosion Even though Aluminium has good corrosion resistance, it is still susceptible to corrosion. Aluminium is somewhat protected from corrosion as an aluminium oxide film forms on the surface. This is due to the aluminium being protected from additional oxidation by the existing aluminium oxide film. Minimal corrosion, such as light surface or small pitting corrosion, does not normally cause a problem to the metal. Heavier corrosion occurring in metals used on aircraft is not wanted as it can lead to a weakening in the structural rigidity of the metal. If this is not rectified it can lead to a structural failure within part of the aircraft. Corrosion can occur in many different forms, which include pitting, intergranular, and galvanic corrosion. Pitting This is one of the main types of corrosion which occurs on an aircrafts wing. This type of corrosion is a localised type and starts on the surface of a metal, whether it is on the skin panels of the aircraft or within the aircraft itself. It works its way through the surface protection of the metal, and then penetrates its way further into the metal creating a hole within the metal itself. Due to metals have different mechanical and chemical properties, when pitting corrosion occurs, the pits created will be different from one metal to another, as shown in on the right. This hole decreases the strength of the metal due to the grain damage caused by the pitting corrosion.pitting_shape.gif Detection One way of detecting certain corrosion is by using x-rays or gamma rays to take a picture of the piece of metal suspected of having corrosion. Once the picture is developed, it is clear to see where the corrosion, such as pitting, is taking place in the metal, as it produced a darker spot on the film. This is due to less of the radiation being absorbed where the corrosion is taking place. If pitting corrosion is taking place, the image can be used also to establish the depth of the pit within the metal. Another way of determining whether pitting corrosion has occurred on a piece of metal is by the use of Eddy currents. This type of non-destructive testing uses magnetic fields, where the metal object being tested is placed. The magnetic field is produced by putting an alternating current through a coil. An alternation in the back EMF (Electromotive force) occurs when the eddy current gets disturbed by a pit in the metal. This alternation is amplified so it can be seen as an image or heard as a sound by the operator. Prevention There are lots of ways to try and prevent corrosion from occurring. One method is to uses surface treatments which protect the surface of the metal, therefore reducing the chance of corrosion and painting the metal surface can also prevent corrosion as no air or moisture can tough the metal. The use of cathodic protection can also prevent corrosion. Composites The use of composites within aircrafts is a relatively new concept. They were first introduced in the 1980s in secondary aircraft components, such as wing leading and trailing edges, and then as more composites were produced they made their way into larger structures in the 1990s. The Boeing 787 dreamliner tries to make the fullest use out of composite materials that is possible. Around 50% of the full aircraft, including several parts of the wings are manufactured using composites. The rest is manufactured using other materials, such as aluminium, which incorporate properties which at the present cannot be bettered by composites. At the moment composites are used mainly on non structural parts of the wings, and are used on parts such as the wings skins and the flaps. The great attraction for airline industries to use composites within the manufacture of their aircraft is because composites can be strong, and at the same time be lightweight. This means that heavier metals can be replaced with lighter weight composites which have the same strength. This causes the overall weight of the aircraft to decrease, resulting in a more fuel efficient aircraft as less fuel is needed to be burned to move the aircraft. This is an advantage to an airline company as it would result in lower running costs for that aircraft. Costs in manufacturing were also managed to be reduced as during assembly, a smaller quantity of fasteners were needed and there were also a smaller amount of parts required to construct the component. Composites do have disadvantages compared to metals for use within aircraft. One of these is that damage to composites can be difficult to see. Another is due to the fact that composites do not conduct electricity which may cause a problem if the aircraft is struck by lightning. These have also been concerns regarding the safety of the use of composites if there was a crash. Make up Composites are made up by joining together two or more materials which creates a material with improved properties compared to that of both original materials. Composites are made up of a matrix, which is a resin which joins together with a reinforcing material, which is a fibre. There are different types of reinforcing fibre and matrix which individually have different properties and need to be carefully chosen to make sure that they will be suitable for their purpose within the aircraft if chosen. The most commonly used reinforcing fibre used in aircraft is Kevlar. This is due to it having the greatest impact resistance and tensile strength compared to all other reinforcing materials while still being reasonably light. Types Carbon fibre reinforced plastic is the composite used within the manufacture of the Boeing 787 aircraft wing. This composite is used as it has lightweight qualities while also being very strong, and can have the equivalent strength to steel. It is manufactured using carbon fibre as the reinforcing fibre and the matrix is usually epoxy. Damage One of the main disadvantages with the use of composites is the difficulty to tell if damage has occurred within it, this can be known as barely visible damage. This is due to the way in which the composite structure is manufactured and that the majority of the damage will occur behind the surface. The surface of the composite may only seem to have a small bit of damage, such as a bit of scratched paintwork, while behind it the inside of the structure has been badly damaged. Delamination can happen due to moisture being able to go through the surface of the composite. If this moisture freezes, which can occur at high altitudes, it will start to force the layers of the composites apart. This could continue to occur if undetected causing serious damage to the composite structure. Fibre damage, where the fibres within the reinforcing material break, and matrix damage, where the matrix splits, may also occur if there is damage to the composite. Inspection There are several ways of testing for damage to composites. The simplest one of these is tap testing. This is where the surface of the composite is tapped using either a light hammer or a coin. An area of which is undamaged will make a ringing sound where as a duller note will be heard if the area is damaged. A more accurate version of this method can be had with the use of an electronic tap tester. Other methods of detecting damage are with the use of ultrasonic or x-ray machines. All these forms of testing are known as non destructive testing. This is due to no damage is needed to be made to the component getting tested by any of these methods. Repair Unlike Aluminium which can withstand damage and still be useable, composites when damaged have to be either repaired or replaced immediately. Repairing a composite panel is considerably more difficult than repairing an aluminium panel. This means that the repair will take a longer time in comparison, and will mean that the aircraft will be out of service longer. The cost of the materials to replace the damaged part is also more expensive, and may not be available at the airport where the damage is detected. Special training for working with composites may also be needed, resulting in even greater costs for the airline operator. Lightning Strikes The use of metal wing skins meant that if there was a lightning strike on the aircraft, it would be dispersed over the whole body of the aircraft and would dissipate at the end of the wings, through static dischargers, due to its conductive nature. The problem with the use of some composites as a wing skin is that they are considerable less conductive compared to a metal wing skin. Therefore, this could lead to damage occurring to the composite panel as the intensity of the lightning strike would be concentrated on the spot it hit as there would be no way for the energy to disperse due to the non conductive nature of the composite. The main danger of this is that the energy of the lightning bolt may be able to penetrate through the surface of the skin enough to produce a spark inside the wings where the fuel tanks are. This spark could cause the fuel vapour within the tanks to ignite, causing an explosion within the wing. Boeing have created several ways to prevent this scenario from occurring within their 787 dreamliner. The main method is having a thin metal mesh on the outside of the composite. This causes the composite skin panel to act in the same way as the metal one, and disperse the energy of the lightning strike over the whole surface of the aircraft. They also make sure that each fastener holding the composite skin panel to the wing structure is tightly fitting, preventing sparking from occurring between the spaces. Edge sealant will also be used to make sure there are no gaps present, and can be of either a glass fibre or goop. The use of a nitrogen generating system will be used to add nitrogen into the fuel tank, which will mix with the fuel vapours creating a safer non-flammable mixture should a spark occur. Future Materials New materials are continually being created by the aviation industry to try and lighten their aircrafts, and thus making them more appealing to airline operators. There has been increased competition to try and make composite materials which can be used throughout an aircraft. Other manufacturers are looking for slightly different ways to improve on materials that are available at present, with the use of shape memory alloys. Composite Spar Al/Composite The continued development of composites has lead to the creation of a material which incorporates both aluminium and composite. This material would be ideal for the use in aircraft wings due to several properties in which it possesses. The main one being that it is virtually fully resistant to metal fatigue. Metal fatigue comes about due to the cyclic loading of material. This will lead to a failure of the metal after a crack starts within the component then increases in size. This is relevant in aircraft wings as they experience cyclic loading as the lift generated by them changes during flight, such as take off and during patches of turbulence. Compared to the manufacturing costs of composites, the manufacturing costs of this material are significantly lower. As well as this, repairs to damaged sections are more straightforward compared to composites, which reduce the cost. The strength properties in which this material holds are greater than the composites which are used in aircraft wings at the present time. The most noticeable being the Boeing 787 which incorporates carbon fibre reinforced plastic. Due to this increased strength, the thickness of the material needed can be reduced and this can lead to a weight saving of around twenty percent, which is equivalent of between 600 to 800kg. This reduction in weight will cause a reduction in fuel use, along with the reduction in maintenance cost will reduced the overall running costs imposed on the airline operator. Morphing wing Shape memory alloys have existed for a reasonable long time, but it is only recently in which it has found a purpose within the airline industry. The use of shape memory alloys within the manufacture of aircraft wings is being looked at to improve the efficiency of the wing. This would happen as the flight crew would be able to change the shape of parts of the wing during different flight operations. There has been research into the development of a fully morphing wing and also that of a morphing winglet. Both of these ideas would lead to several advantages, but there are also disadvantages of the use of shape memory alloys. The main advantage of this material is that it can remember its shape after being deformed. When the material has been deformed, if the material is then heated to a certain temperature it will return to original shape. These materials also incorporate the property of Pseudo elasticity, which is super elasticity. This is when if the alloy is subjected to load it will stretch and change form. The load imposed on the material will then be absorbed, and it will return to its original form and shape. Shape memory alloys, such as Nickel Titanium, can be polished to give very smooth finishes resulting in a reduction in drag as the air flows over it. There are disadvantages which hold up the development of shape memory alloys, which include the difficulty and the cost of manufacture. The main problem with the use of this material in aircraft wings is that it does not have very good fatigue properties, which one needs. A shape memory alloy is manufactured to the shape in which it will take when heat is applied to it. As the reactivity of titanium is high, the use of a vacuum during manufacture is common. Hot working is one of the methods used to create these types of alloy and is where the material is heated up to temperatures of 900oc and then shaped. Cold working is another method that can also be used, but comes with the disadvantage that the material need constant heat treatment due to work hardening occurring. The use of this material in winglets would allow the winglets to change shape depending on the flight conditions such as the relative airspeed of the aircraft. This would allow them to have the most efficient angle between them and the wing. A reduction in wing vortices would then be able to occur over each flight operation. The drag experience on the aircraft at each point would be minimised, in turn reducing the fuel consumption of the aircraft as less thrust is required to move the aircraft would decrease. The idea of the winglets flattening out during takeoff and landing is also being examined as the wing would produce more lift at the slower speeds. This means there would be a reduction of noise generated from the engines as less thrust would be required. Constructing a wing out of smart alloy materials has been look at as it could lead to several advantageous properties, such as weight saving and reduction in drag. This means that the wing could change shape during flight operations to make them more efficient. The wing surface would be continuous as there would be no gaps in between flap and the surface would be smoother as there would be fewer rivets needed. This would result in a reduction of drag generated from the surface of the wing. A reduction in weight could be seen from the removal of the hydraulic system needed to move the control surfaces of the wing at present. There has also been investigation into using the shape memory alloy for use in just the leading and trailing edges as a replacement for the traditional metal flaps. The overall result of using shape memory alloys to replace traditional wings would be better fuel consumption as there would be a reduction of drag and weight. Discussion Conclusion I recommend that there should be a continued development of composites within the airline sector. This will lead to the manufacture of composites which are strong enough to be used on the main structural parts of the wings, and which could also be used on other components of the aircraft. The more widely use of composites would also lead to a reduction of weight of the aircraft, making them more fuel efficient and more environmentally friendly. This would also be an advantage for the airline company as there would be a reduction in the amount of fuel needed resulting in reduced running costs.

Essay --

The importance of cultural context within any type of text is essential in order to elucidate a distinct argument. In Joseph Conrad’s Heart of Darkness, a novella starring the experiences of an ivory trader in Central Africa named Charles Marlow, various themes of racism and human cruelty are discussed in relation to its contextual features. The film â€Å"Apocalypse Now† by Francis Ford Coppola adapts this idea of implementing a correlation between its central ideas to a specific cultural context as well. The central research question this extended essay focuses on is how do different features used in Heart of Darkness by Joseph Conrad and the film version of "Apocalypse Now" by Francis Ford Coppola help criticize imperialism? In Heart of Darkness and â€Å"Apocalypse Now,† the struggle between the barbaric nature of the natives and the oppressive nature of Imperialism is questioned through the use of characterization of various factors. Before Kurtz, the main antagonist in both texts, is even introduced in either the novella or the film, details are revealed about him through Marlow and Willard, the protagonists of the two texts. The gruesome nature of imperialism is revealed through Marlow and Willard journey through the jungles. The inhumane state in which the slaves are illustrated opens Marlow’s eyes to the cruelty of slavery. Similarly, Willard witnesses the torture the locals experience on a daily basis, such as the way they are treated. The journeys of both protagonists project the overall negativity associated with imperialism, which helps the audience in understanding the soldiers’ psychological states before Kurtz makes an appearance. Although Colonel Kurtz is the antagonist in both texts, he is admired by the two protagonists,... ...h is not restrained by social conventions, Imperialism attempts to justify its savagery. The very fact Imperialists claim to be ‘fighting to the sanity of the world’ demonstrates the corrosive effects it has not only in a confined area, but also to neighboring cultures. By delving deeper into the characters’ subconscious and the true nature of Western Imperialism, the absurdity of what really is considered â€Å"true evil† is questioned by both Conrad and Coppola. Despite the fact colonization in various parts of the world officially ended in the 60’s, different systems of indirect rule were put in place because of continued interest in some parts. Both Heart of Darkness by Joseph Conrad and â€Å"Apocalypse Now† by Francis Ford Coppola are aware of this continued, albeit unfortunate practice, and represents the futility of expecting the eradication of imperialistic values.

Essay --

Chris Layton 12 September 2013 Block 1 Rough Draft Drugs & Athletes During the advancement of technology, athletes have been able to get powerful drugs that help them during physical activity. These drugs are also banned by the World Anti-Doping Agency (WADA). They use these drugs to give them a competitive edge to keep up with the competition. Some athletes have distinctive trait that some do not like having a gene that helps them perform like the ACE gene helps perform in long distance events. Other athletes that compete have to use performance enhancing drugs (PEDs) to be able to keep up with them and have a chance to win. Performance enhancing drugs, including blood doping, stimulants, and human growth hormone, should be prohibited because of moral and ethical concerns and the personal consequences to athletes. Performance enhancing drugs have been used since ancient times. The use of enhancement substances for sporting events dates back to the ancient Greeks and ancient Maya. () Performance potions were utilized by the Greeks to increase their abilities and cocoa leaves were thought to be used by ancient Maya. () Today, athletes will go to many lengths to increase athletic ability, including: steroids, HGH, Amphetamines, and even animal or human organs just as the Greeks did in their time. () The most common performance enhancing drugs or treatment is blood doping, stimulants, human growth hormone (HGH), and anabolic steroids. Stimulants are a generic term to describe various substances that are ingested by athletes into the human body for the purpose of increasing alertness or general physical performance. Common stimulants that have been typically utilized by athletes in various disciplines are caffeine, amphetamines, a... ...drugs and go suspended for one and a half seasons. Performance enhancing drugs are not worth all the problems they can cause and definitely not worth your fans losing respect for you because they’re the ones who support you throughout your years. Overall, the negative effects of PED’s overweigh the positive effects of the use and abuse of them. The head of sports made the right move to ban, performance enhancing drugs, including blood doping, stimulants, and human growth hormone, should be prohibited because of moral and ethical concerns and the personal consequences to athletes. Performance enhancing drugs granted give you an edge over your competitor, but later in life you will regret using them because it’s effects will still be there rather you’re still on them or not. The World Anti-Doping Agency made the right move to ban all substances that harm yourself.

“One Flew Over the Cuckoo’s Nest” by Ken Kesey Essay

Throughout history, the struggle of women to gain and sustain power in society has proven to be difficult, and has coexisted with a rivalry against the opposite sex. Women have been denied many throughout the course of history. They have been discriminated against, lost jobs, lost privileges. Women’s suffrage had not developed in the United States until the Nineteenth Amendment, which became effective in time to allow the voting by women nationally in the Presidential election of August 18, 1920. Stereotypical views of the ideal features of women are femininity, maternity, gentility, care, nurture, and dependency. Not matriarchy, independence, nor strength. Women are not generally associated with these traits, and society generally expects women to posses the assumed feminine characteristics. This is not the case in the novel One Flew Over the Cuckoos Nest, in which Ken Kesey shows a woman can hold a dominating, powerful role in society and be contrary to the stereotypical woman figure to depict the validity of the society’s views about women and their roles using the failure of the matriarchal female character to succeed at her role assumed by her occupation. The matriarchal female, Mildred Big Nurse Ratched, gains control over her realm in the mental hospital, but fails to fulfill her duties as a nurse of healing or helping her patients. The sexist description of her physical appearance provided by her patients are those typically associated with women, however, she completely contradicts the typical female. She is a matriarchal figure, not maternal. She is powerful, not dependent. And she manipulates complete power over the staff and patients of the hospital. However, her matriarchy does not fulfill her duties assumed by her occupation; to heal and help the patients. Instead, she worsens the situation by diminishing their strengths and exposing their weaknesses; which she does to gain control in a way which appeals to her senses. Big Nurse, or Mildred Ratched, attempts, and succeeds, to create her own world within the confines of the ward; one where she is completely in charge of all her subjects. This depicts her strong matriarchal role. Her desire to gain complete control over her environment uses several strategical moves.  After convincing her patients to confess their personal secrets, Ratched is understood by the patients to use the disadvantages of her patients to her own advantage in her accomplishment of gaining absolute power. Nurse Ratched is able to â€Å"smell out† the fear of her patients and â€Å"put it to use† (17) As the novel progresses, we also learn that Ratched’s powers within the ward extend to ludicrous measures as she is able to order harming of the relatively disruptive patients, which contributes to her extensive amount of power withing the ward. In numerous important scenes, we learn the extent of her power to prevent noisome independence: she can, in additio n to all the little arts of prodding the guilty recesses of her â€Å"patients'† consciences, order electric shock, even lobotomize the recalcitrant or merely disruptive patient. (Boardman ) She achieves control over the ward, as her patients, aware of her power, obey willingly or unwillingly. Mac, a patient at the hospital, promises to bug the nurse â€Å"till she comes apart at those neat little seams† (12). However, he learns that he can be institutionalized as long as the nurse sees fit. He immediately becomes cagey, satisfying, temporarily at least (Boardman)Nurse Ratched is able to establish complete control in the ward, and her patients recognize her ability maintain total control; a type of control that is parallel to a monarchy. In her own realm, Ratched is viewed as a very powerful individual, and the patients start to abide by her rules. Harding, a patient, explains, â€Å"‘We are victims of a matriarchy here, my friend, and the doctor is just as helpless against it as we are'† (54). This sentence is remarkably significant. It accredits the nurse as a dominant character in the hospital, and it also establishes the idea that the patients are not the only ones controlled by her, but the doctors as well. At times, Ratched refers to the sexuality of the men in the institute, making them inferior because of their inabilities. Ratched’s strength, and matriarchial character as a woman directly contradict the assumed characteristics associated with women; those of femininity and gentility. This contradiction is established in a way many by critics that look at the surface of the topic as a sexist description. In multiple occurrences throughout the progression of the novel, Ratched’s female characteristics are exaggeratively described by the patients such as McMurphy. McMurphy describes Ratched as having too red lipstick and the too  big boobs. (43) and as a a bitch and a buzzard and a ballcutter. Therefore, Ratched directly opposes the traditional gentle view of women as a matriarch but is given over-exaggerated female characteristics. Kesey’s purpose in creating this contrast between a stereotypical woman and and an ideal woman that is independent and strong is to establish the unsuccessful attempt at triumph of the ideal strong woman. The unsuccessful attempts of Ratched are depicted by her failure to meet the assumed role of being a nurse that consists of helping and healing her patients. Instead of helping, Ratched proceeds to make the state and situation of her patients worse and worse as she puts them down about their inabilities and maintains total control over them. Ratched is even viewed as evil. McMurphy explains, No, that nurse ain’t some kinda monster chicken, buddy, what she is is a ball-cutter. I’ve seen a thousand of ’em, old and young, men and women. Seen ’em all over the country and in the homes–people who try to make you weak so that they can get you to toe the line, to follow their rules, to live like they want you to. †¦ If you’re up against a guy who wants to win by making you weaker instead of making himself stronger, then watch for his knee, he’s gonna go for your vitals. And that’s what that old buzzard is doing. (58) McMurphy also refers to Ratched as impregnable and this sets her apart from the typical view of a female and the clichà ©d mother/whore dichotomy (Quinn) is established in the novel. There is an ambiguity that arises in the course of the novel, and the established dichotomy discussed by Quinn is expanded with a comparison of the two parts; the matriarch and the whore. Whereas Ratched uses power and control to accomplish her role of care and fails, the two whores introduced by McMurphy gain the trust and sympathy of the reader. They are viewed positively and as kind hearted by the patients in the institution. An excellent comparison captures the perception of the two figures; Strong women are evil and emasculating (Quinn) and The women viewed positively in the novel are the kind-hearted whores whom Mac introduces to the men and the sympathetic and very tiny Japanese nurse who works on the Disturbed ward. (Quinn) Through this direct comparison of the strong woman that is apart from a typical figure and the stereotypical woman that performers an act  directly associated with women, one can see that the typical woman is able to do what the other cannot; gain the affection of the male. While Ratched hides her female characteristics by wearing a white coat, the whores display their female attributes, and gain a positive view from the society made up of the hospital. McMurphy’s prior comment of Ratched being impregnable is linked to this comparison, since sexuality is a trait apparently missing from Ratched. Ken Kesey depicts the failure of a non-typical female figure to accomplish her goals as a dominating powerful figure by describing Ratched as evil, and comparing her to whores, who are viewed as kind hearted. This defiant comparison is uncommon since typically whores are viewed as a malignant part of society and nurses are viewed as purgatory. As a complete opposite, the whores are able to help amend the feelings of the patients, whereas Nurse Ratched fails miserably to accomplish her duty and even worsens the situation of her patients. Through the development of the female characters in the novel One Flew Over the Cuckoos Nest, Kesey is able to convince the reader that the stereotypical woman is able to successfully help society, while the unusual matriarchal female is unable to fulfill her duties by gaining control and exercising domination. Works Cited (MLA Format)Boardman, Michael M. â€Å"One Flew over the Cuckoo’s Nest: Rhetoric and Vision.† Journal of Narrative Technique 9. No. 3. Fall 1979.: 171-83. Rpt. in Contemporary Literary Criticism. Quinn, Laura. Moby Dick vs. Big Nurse: A Feminist Defense of a Misogynist Text: One Flew Over the Cuckoo’s Nest. Censored Books: Critical Viewpoints. Ed. Nicholas J. Karolides. Lee Burress. John M. Kean. Scarecrow Press, 1993: 398-413. Rpt. in Novels for Students. Vol. 2. Zubizarreta, John. â€Å"The Disparity of Point of View in One Flew over the Cuckoo’s Nest.† Literature/Film Quarterly 22. No 1. 1994: 62-9. Rpt. in Contemporary Literary Criticism.

Oprah Winfrey Commencement Speech Essay

Oprah’s audience was very receptive of her mainly because she is a respected icon known all over America. The audience was a group of diverse faculty, staff, graduates, family and friends. When Oprah started her speech welcoming the audience, she gave them an icebreaker saying she wanted to let them in on a secret to personalize her speech. She lets the audience know that her god daughter Kirby attends Stanford and she is very proud of her. Oprah uses humor throughout her speech as she says the name â€Å"Stanford† engaging the audience as she speaks. She gives personal experience in her speech to show her audience that she too had experiences throughout college that could have hindered her from being the icon she is today. Oprah uses great eye contact throughout her speech. She did not read word for word what was on her paper because most of her speech was based off her experience as a student in the past at the beginning of the speech. She gave quotes of her father and B.B. King about learning that is beautiful. She lets the graduates know that your education had just started. Her speech lead on to elaborate on how the world has so many lessons to teach. She lets the audience know that earth is like a school and our lives are the classrooms. Life will have detours and road block but the secret to learn to be open to the lessons. Self improvement will help evolve as human beings. Oprah speaks with an inviting tone keeping her audience engaged. Even though the speech is lengthy, Oprah was not repetitive. She explained a few life lessons of her own journey but still gave humor as she spoke about the main lessons of her speech. The audience was still engaged throughout her speech. Oprah was very familiar with her speech content. She spoke as if she was graduating herself and speaking like she would want to be spoken to as a graduate. Oprah’s posture was appropriate and the gestures she uses with her hands and tone of her voice made the speech stand out more towards her audience. The overall tone of the message was exciting, funny and receptive. Oprah’s speech was spoken to relate to those who were not graduates also. She wants  the audience to understand that a degree is important and you can not allow yourself or others to defer you of a goal or dream. The speech Oprah gave was ethical. She realized the majority of her audience was of the white race and she included her own racial experiences in her speech with the stories she shared. Her own experiences made up the entire speech. The graduates seemed like they were listening and understanding the speech based off the feedback they gave after she spoke. There were interactions from the audience when Oprah spoke about how she made it as the icon talk show host. Oprah conveys to her audience to learn that life is more than just making money. You have to earn it and making money has to have meaning. If you do not have meaning in making your money and making a difference to the world then money doesn’t matter. Oprah shows much inspiration in her speech that should make the audience aspire to be like her or even more. Overall, Oprah did a great job catering to the diverse audience with her speech. It did not seem rehearsed, she gave eye contact and her audience seemed engaged in her speech for the 30 minutes I analyzed it. She did a great job and kept me engaged myself.